Handheld automatic locking screw machine is also called automatic locking screw machine, automatic locking screw machine, automatic screwing machine, automatic screwing machine, screw locking robot, etc. Handheld type requires manual manual Operation...
Hand-held automatic locking screw machine is also called automatic locking screw machine, automatic locking screw machine, automatic screw machine , automatic screw machine, screw lock robot, etc., hand-held is the need for manual operation. The hand-held automatic locking screw machine is also called automatic locking screw machine, automatic screw-feeding machine, automatic screwing machine, automatic screwing machine, screw-locking robot, etc. Hand-held type requires manual operation. Brief introduction:
The automatic screwing machine is mainly composed of sorting, separating and locking. Compared with the one-handed screw and the electric screwdriver in one hand, the automatic locking screw machine can liberate one hand and only need one hand to align the screw hole lock screw. When locking a screw, just lift the screwdriver and align it with the next screw hole lock screw. The machine will automatically transfer a screw to the batch nozzle at the moment of lifting the screwdriver, waiting for the next screw to be locked. Advantages: 1. Increase production efficiency, reduce workers, and save costs. 2. The screws are not taken by hand, and the screws are automatically fed to the batch mouth. 3, one-handed locking operation, the lock cylinder is completed with the easy piezoelectric batch. 4. The efficiency is as high as 60 capsules/min. 5, the screw will not be secondary pollution. 6. Reduce the labor intensity of workers. 7, liquid crystal display, can count, alarm. 8. Enhance the company's unified image. Conditions of use:
Screws and screws must meet certain conditions: 1. The ratio of screw head D to the length of the screw thread L: L>D+2.5 units: mm. 2. There is no obstacle within 10mm around the screw hole, and the obstacle should not be too high. 3. The surface of the screw hole is a plane or a slope of less than 30 degrees.